Dave's Impala Parts For Sale!
Below are some of the parts I already sold. Go here to see which parts I still have available.
102 |
Hood hinge set |
Fits 1972 Impala/Caprice and possibly other years
or models. No springs included. |
$20 |
|
103 |
Hood hinge set |
Fits 1972 Impala/Caprice and possibly other years
or models. Springs included. One mounted, the other is not. |
SOLD |
|
104 |
Kick panel set |
From 1972 Impala convertible. Both have hole for vent
control. Only comes with one of the cables. |
$30 |
|
105 |
Header panel molding |
For 1972 Impala/Caprice. A little banged up in one
spot. |
$15 |
|
111 |
Lower grille |
For 1972 Impala. Missing a few small pieces |
$20 |
|
112 |
Rear quarter glass |
For 1972 Impala/Caprice convertible. No tint. Some
hardware included but selling for glass only. Left and right
side. |
$60 |
|
113 |
Rear quarter glass |
For 1972 Impala/Caprice convertible. Has tint. Some
hardware included but selling for glass only. Left and right
side. |
$60 |
|
114 |
Door glass |
For 1972 Impala/Caprice convertible. No tint. Passenger
side. |
$50 |
|
115 |
Door glass |
For 1972 Impala/Caprice convertible. No tint. Driver
side. |
$50 |
|
116 |
Quarter glass seal |
For 1972 Impala/Caprice. Both sides. Rubber only. |
SOLD |
|
119 |
Convertible top |
Tan top for 1971-1976 GM Scissortop convertibles.
Never installed. I think I paid $135 for this but I decided to
go with a white top, so I don't need this one. |
SOLD |
|
120 |
Front license bracket |
For 1972 Impala/Caprice. Rusty but usable. |
$5 |
|
121 |
Radiator top support |
From a 1972 Caprice. Has surface rust but metal is
not bad. I think it will fit most or all of the 1971-1976 full-size
Chevys. |
$20 |
|
129 |
Seat belts |
For 1972 Impala/Caprice. Might fit other years. These
are nice restorations. This is the driver & passenger shoulder
belt. My convertible doesn't use a shoulder belt, so these are
extra. |
SOLD |
|
130 |
Hood |
For 1972 Impala/Caprice. Might fit other years, but
you should find out first if you want it for another year car. |
$150 |
|
131 |
Hood |
For 1972 Impala/Caprice. Might fit other years, but
you should find out first if you want it for another year car.
Hood is straight but it has a little warpage along the center
ridge. |
$100 |
|
132 |
Gas tank |
For 1972 Impala/Caprice. Might fit other years, but
you should find out first if you want it for another year car.
Very nice metal. Just a touch of surface rust. This will last
forever if you paint it! |
$150 |
|
133 |
Rear bumper |
For 1972 Impala/Caprice. Bumper is straight but does
have some dings. Comes with license plate assembly and inner
bumper. |
$100 |
|
134 |
Front inner fender |
For 1972 Impala/Caprice. Might fit other years, but
you should find out first if you want it for another year car.
Driver and passenger side. Nice metal. |
$150 |
|
135 |
Quarter panel skin |
For 1972 Impala/Caprice. Might fit other years, but
you should find out first if you want it for another year car. |
$50 |
|
136 |
Driver door |
For 1972 Impala/Caprice 2 door cars. Might fit other
years, but you should find out first if you want it for another
year car. |
$50 |
|
137 |
Rear bumper |
For 1972 Impala/Caprice. Bumper is straight. Comes
with license plate assembly and inner bumper and mounting brackets.
Bumper had hole cut in it for mounting trailer light wiring. |
$125 |
|
138 |
Trunk lid |
For 1972 Impala/Caprice 2 door Custom Coupe. Might
fit other years, but you should find out first if you want it
for another year car. Needs work in one area as you can see in
the photo. |
$50 |
|
150 |
Tail light lenses |
For 1972 Impala/Caprice. Nice plastic. One side has
a scuff mark (upper left corner of photo) which might come out
with some buffing. |
SOLD |
|
151 |
Tail light housings |
For 1972 Impala/Caprice. |
$30 |
|
152 |
Side molding |
For 1972 Impala/Caprice. Might fit other years. Includes
door and quarter panel pieces, no fender pieces. Pieces will
need some work but are not too bad in most areas. |
$50 |
|
153 |
Front bumper brackets |
For 1972 Impala/Caprice. Might fit other years. Driver
and passenger side inner brackets. |
$30 |
|
154 |
Front bumper brackets |
For 1972 Impala/Caprice. Might fit other years. Driver
and passenger side outer brackets. |
$30 |
|
159 |
Dash vent |
This will fit one or more vent positions on the 1972
Impala/Caprice. Might fit many other GM vehicles. Year One part
number AV972. |
SOLD |
|
160 |
Dash vent |
This will fit one or more vent positions on the 1972
Impala/Caprice. Might fit many other GM vehicles. |
SOLD |
|
161 |
Dash vent |
This will fit one or more vent positions on the 1972
Impala/Caprice. Might fit many other GM vehicles. |
SOLD |
|
162 |
Dash vent |
This will fit one or more vent positions on the 1972
Impala/Caprice. Might fit many other GM vehicles. |
SOLD |
|
163 |
Interior trim |
For 1972 Impala/Caprice, not convertible. |
SOLD |
|
165 |
Front blinker housing and lens |
For 1972 Impala/Caprice. Drive and passenger side. |
SOLD |
|
172 |
Header emblem |
For 1972 Impala. |
SOLD |
|
164 |
Duct |
For 1972 Impala/Caprice. Fits under dash. |
$15 |
|
170 |
Radiator core support brackets |
For 1972 Impala/Caprice, maybe other years too. Driver
and passenger side. |
$20 |
|
173 |
Sail panel emblems |
For 1972 Caprice. Might work for other years too. |
$10 |
|
177 |
Header emblem |
For 1972 Impala. |
$10 |
|
178 |
Front license bracket |
For 1972 Impala/Caprice. |
$10 |
|
179 |
Trunk emblem |
For 1976 Malibu. I think it's from the trunk. If you
have a Malibu, you know where it goes. |
$5 |
|
181 |
Duct |
From 1972 Impala with no A/C. |
$10 |
|
182 |
Duct and vent |
For 1972 Impala/Caprice. Might fit other years or
models. |
SOLD |
|
183 |
Duct and vent |
For 1972 Impala/Caprice. Might fit other years or
models. |
SOLD |
|
184 |
Headlight |
For 1972 Impala/Caprice. Fits many other vehicles. |
SOLD |
|
185 |
Headlight |
For 1972 Impala/Caprice. Fits many other vehicles. |
$5 |
|
186 |
NOS wheel cover centers |
For 1972 Impala. |
$25 |
|
189 |
Hood springs |
For 1972 Impala/Caprice. Might fit many other years
and models. 1 Pair. |
$20 |
|
192 |
Brake line |
For 1972 Impala/Caprice. New brake like w/fittings.
Goes from proportioning valve to rear brake hose. |
$25 |
|
194 |
Rear window tracks |
For 1972 Impala/Caprice 2 door models. Driver and
passenger side. |
$20 |
|
195 |
Trunk weatherstrip |
For 1972 Impala/Caprice and most likely a million
other cars out there. |
SOLD |
|
197 |
Horn pad |
For 1972 Impala and maybe other years as well. |
$20 |
|
198 |
Header emblem |
For 1972 Caprice. |
$15 |
|
200 |
Tail light lenses |
For 1972 Impala/Caprice, all models except wagon.
Driver and passenger side. Real nice condition. |
SOLD |
|
204 |
Wheel covers |
For 1972 Impala/Caprice with 15" rims |
$40 |
|
206 |
Radiator shroud |
From a 1972 Impala convertible with 350 2bbl motor. |
$15 |
|
207 |
Wheel covers |
For 1972 Impala/Caprice with 15" rims |
SOLD |
|
208 |
Wheel covers |
For 1972 Impala/Caprice with 15" rims |
$15 |
|
209 |
Wheel covers |
For 1972 Impala/Caprice with 15" rims |
SOLD |
|
211 |
Lower grille |
For 1972 Impala. Missing a few pieces. |
SOLD |
|
212 |
Visor |
From a 1972 Impala. Should fit some other years and
models. |
$15 |
|
213 |
Upper grille |
For 1972 Impala. Has some damage as shown. |
SOLD |
|
214 |
Dash piece |
From a 1972 Caprice. Should fit some other 1971-1976
Impala/Caprice. Has a few cracked areas but overall the plastic
is ok. |
SOLD |
|
215 |
Rear trailing arms |
For 1972 Impala/Caprice. Should fit other years as
well. Rusty but still strong. |
SOLD |
|
302 |
Rear view mirror |
For 1972 Impala/Caprice. Should fit some other cars
as well. |
$10 |
|
305 |
Breather tube |
For 1972 Impala with 4bbl carb. |
SOLD |
|
307 |
Dash piece |
From a 1972 Caprice. Should fit some other 1971-1976
Impala/Caprice. Has small cracked area shown. |
SOLD |
|
313 |
Duct and vent |
From a 1972 Caprice. Should fit some other 1971-1976
Impala/Caprice. |
$10 |
|
314 |
Duct |
From a 1972 Caprice. Should fit some other 1971-1976
Impala/Caprice. |
$10 |
|
317 |
Door sill plates |
From 1976 Malibu 4 door. Should fit 1973-1977 4 door
Malibu's. |
$30 |
|
318 |
Visor brackets |
From 1972 Impala convertible. A little sand blasting
broke out the hole as shown. Other one is ok, though pitted a
little. |
$30 |
|
319 |
Wheel opening moldings |
For 1972 Impala/Caprice w/out skirts. Driver and passenger
side rear. NOS pieces with some shelf wear. Overall, very nice
pieces. |
SOLD |
|
320 |
Header molding |
For 1972 Impala/Caprice. Nice straight metal with
some scratches as shown. |
SOLD |
|
321 |
Header molding |
For 1972 Impala/Caprice. Nice piece. |
$25 |
|
322 |
Wheel opening molding |
For 1972 Impala/Caprice w/out skirts. Driver side
rear. NOS piece with some shelf wear. Overall, pretty nice piece.
It looks like someone tried straightening the piece as shown. |
$60 |
|
323 |
Windshield top molding |
For 1972 Impala/Caprice convertible. Might also work
on many other 1971-1976 GM convertibles. Metal is very nice,
no dings. |
$25 |
|
326 |
Fender molding |
For 1972 Impala/Caprice. Missing vinyl insert. Metal
is very nice. Might also work on some other 1971-1976 GM. |
$20 |
|
139 |
Rear window molding |
For 1972 Impala/Caprice 2 door Custom Coupe. Might
fit other years, but you should find out first if you want it
for another year car. Might need a small amount of work, rest
of metal is nice. |
SOLD |
|
[Home] - [Site Map] - [Donate] - [Car Shows] - [Multimedia] - [Photos] - [Links] - [Contact]
Copyright© 2003 StillRuns.com